top of page

Monitoring...

​

  • Barefoot MM27 Gen1

  • Yamaha NS10M

  • Apple G4 Cubes

​

The control room and monitoring was designed and tuned by George Augspurger.

 

Barefoot MM27 Gen1 are setup as mains.  The console allows for an alt speaker selection which are small "radio" style Apple G4 cubes powered by two Hypex NC400 monoblocks.

 

Yamaha NS10s are available and can be interchanged with either other speaker pair.  There is a Yamaha P2200 available to power the NS10s.

​

The console allows selectable monitoring of:

  • Mix Bus

  • Tape Sync

  • Tape

  • 2 Trk / DAW Monitor (Apogee 2x6 SE Analog Out 1-2)

  • Aux (Bluetooth + 3.5mm with Lightning in the cntrl rm)

Cue...

​

  • Sony MDR7506

  • Beyerdynamic DT770

  • Crown Amplifiers

  • Behringer X32 with complete P16 system


There are a multitude of headphone monitoring options to best accommodate a variety of tracking scenarios such as:

​

  • Tracking or writing in the control room

  • Performers on location with an engineer controlled mix

  • Ensemble on location with personal mixers

  • Bands who want to run their own IEM


For working ITB inside the control room there are two headphone feeds directly from each respective Apogee converter which monitor DAW monitor outs, each with independent level control.  


For analog recording, or as a very low latency option, there are cue sends from each channel of the console which normal to a Crown D75 amplifier.  The stereo cue input is patchable so any other source can be sent to the cue monitoring (such as a send from PT). 

 

Each D75 can feed multiple passive headphone distribution boxes. Each box has 4 HP jacks each with their own vol control. We have 4 boxes each with 4 HP jacks accommodating up to 16 musicians.

 

For an artist controlled analog multichannel mix, there is a 16 channel Behringer mixer which feeds an additional Crown D75 that can be located next to the performer.


For multichannel independent mixes for multiple performers, there is a 16 channel Behringer P16 system with 5 mixers.

​

Lastly, for touring artists or bands who want to keep their IEM and live setups, we have a Behringer X32 which can either use the P16 system or send to a Crown D75 and feed passive HP boxes. 

 

*You can also use your own mixer and monitor system with all your settings by taking the splits off the main snake just as you would live

Console talkback options are cue, studio, or slate and can be routed through Dante.

 

SLS utilizes a small powered loudspeaker located in the performance area.

 

All our headphones are 80 ohm regardless of brand or model.

 

bottom of page